I think each of my glass pieces have qualities that I like, In this one, the confetti glass has melted on the top to give a slightly textured surface, and has created a fairly random pattern because of the way it melts. The two pieces with copper encased in them have also changed quite a lot, in that the copper has oxidised and has changed colour in the kiln, because of the heat. I quite like these colours, and also there are some tiny bubbles trapped with the metal which I think is quite an interesting feature.
In the one with pieces of black glass, the glass shards, which were squares and triangles to begin with, have melted and spread out to make quite interesting smooth, round shapes, but still have an obvious texture and stand out from the flat background. Also they are very shiny in comparison to the base piece.
Showing posts with label confetti glass. Show all posts
Showing posts with label confetti glass. Show all posts
Monday, 13 May 2013
Glasswork: pattern and texture
I wanted to experiment with pattern and texture in glass, so I first laid small pieces of black glass onto a small sheet of clear glass, so there would be a texture when it came out of the kiln.
I also did the same thing but using confetti glass in different colours, inspired by snake skin. I used a very small amount of vaseline to make sure the pieces wouldn't move when it is being put into the kiln.
I then started looking at encasing things between two pieces of glass. I did this with copper, because the glass gets very hot in the kiln, so things with a low melting point like plastics would not keep the pattern as I wanted. I cut copper into the shapes I wanted, to make zebra pattern and a repeating pattern of diamonds. I also used copper wire to make a handle so the pieces could be hung, or possibly be made into jewellery, although they would be very heavy to wear.
Labels:
black glass,
confetti glass,
copper,
encasing,
glass,
glasswork,
jewellery,
pattern,
texture
Tuesday, 5 February 2013
Glasswork: encasing small pieces.
I have been experimenting with glass. Firstly, I used sheet glass, cut it to size and added washers, scrap metal pieces and confetti glass. I used vaseline to make sure the pieces didn't move and secured the edges with masking tape to keep them together. These then went into the glass kiln, to melt the glass and fuse the pieces together. I think this worked very weel, and I especially like the bubbles in my smaller piece. I also like the colour the copper pieces went
Subscribe to:
Posts (Atom)
